CEUs
PDHs
Eng.
Wood
Fire Hiring Legislative SBC
Association
SBC
Mag.
Steel Testing TPI Training

BCMC Corner Graphic
BCMC General Header
LOGIN Join SBCA |  Contact Us |  Site Map |  Print |  Questions?

Menu didn't load. Click here or refresh to view.


SBC One Minute Poll

SPECIAL THANKS TO BCMC 2009 EXHIBITORS

Did you know all of the proceeds received from BCMC go back into our industry? We want to take this opportunity to thank BCMC Exhibitors for their significant support and sponsorship of structural building components industry programs. Without their continued support we would not have made such great achievements.

CURRENT STATISTICS

  • Total Exhibitors: 78
  • New Exhibitors in 2009: 7
  • Floor Space Reserved: 20,300 sq.ft.

Floor Plan & Booth List

Download Floor Plan
Download Booth List

EXHIBITOR INFORMATION

Filter the list below by a product or service:

Select to jump to an exhibitor:

To request information from our exhibitors prior to the show: Check the box next to each exhibitor that you would like information from, indicate specific requests (if applicable), complete the form at the bottom of the page and submit the form. We will forward your requests on to the exhibitors.

Please before using this form to submit requests for information. By doing so you will avoid the need to enter your contact information at the bottom of this page.

Accelerated Building Technologies — 100 sq.ft. — Booth #411

New Exhibitor 

The accel-E panel system features a molded expandable polystyrene and galvanized steel panel which comes in several thicknesses and is available in custom lengths. The panel utilizes a tongue and groove joint as well as an open cavity for easy installation of utilities. The products are fully tested and code compliant and can be used in multiple applications such as bypass and in-fill curtain walls, structural walls and demising or partition walls. Accelerated Building Technologies has developed the accel-E system to be contractor friendly and to streamline the entire construction process as well as improve thermal performance.

Contact: Mr. Bruce G. Ligo • 412-490-4798 • 412-490-5066 fax • Send Bruce a messagewww.accbt.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Aegis Metal Framing (Sharing space with MiTek) — Booth #709

SBC Gold Advertiser 

Aegis Metal Framing, a division of MiTek is a leading supplier of products, software, and engineering to the pre-fabricated steel components industry. Our Ultra-Span® truss system, TradeReady® floor joists, and WallSolutions™ panels offer component manufacturers a full line of cost-effective structural solutions. All products are supported with advanced software and comprehensive engineering services.

Contact: Ms. Jayna Altman • 314-851-2200 • 314-434-5234 fax • Send Jayna a messagewww.aegismetalframing.com

Products & Services (2): Computer SoftwareSteel Framing

Please send me information on:





More info

Alpine, an ITW Company — 2,500 sq.ft. — Booth #120

SBC Gold Advertiser 

ITW Building Components Group is the leading supplier of innovative products and services for the building component industry. We offer engineering services, design & management software, cutting and manufacturing equipment for truss and wall components, a unique trimmable end floor truss system and metal truss connector plates to the component industry. The pioneering work done for wood components was applied to develop an unsurpassed cold-formed steel product line. These outstanding products and services allow our customers to manufacture the finest building components available anywhere. We have expanded our software product line to include design and manufacturing programs that streamline the entire building process.

Contact: Mr. Karl Bickel, PE • 314-344-9121 • 314-344-3157 fax • Send Karl a messagewww.itwbcg.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Arch Chemicals, Inc. — 100 sq.ft. — Booth #321

Protect your customers and your reputation against mold by using and producing -- FrameGuard® mold-resistant wood. Arch Wood Protection has introduced a mold-inhibiting coating that protects wood products against mold, termites, and fungal decay. Suitable for factory-application on lumber, OSB, engineered wood products, trusses, and SIPs, the end products are being promoted as FrameGuard® mold-resistant wood, winner of a 2007 NAHB Green Building Award and listed in the GreenSpec® directory. Arch Wood Protection is also developer of Wolmanized® pressure-treated wood and Dricon® fire retardant treated wood.

Contact: Ms. Elizabeth Santiago • 678-627-2498 • 770-801-1990 fax • Send Elizabeth a messagewww.frameguardwood.com


Please send me information on:




Bowermaster & Assoc./WoodPro Insurance — 100 sq.ft. — Booth #210

Bowermaster & Associates is an expert partner with the SBCA. We are the leader in providing the Building Component Industry with the best coverage at the lowest cost. Over 40 truss manufacturers choose Bowermaster's Woodpro specialists to protect their insurance needs. Bowermaster & Associates is a full service insurance agency offering Property and Casualty insurance, Workers' Compensation, Health and Employee Benefits, Retirement and Financial Planning, and Human Resource Consultation. Stop by and see what we can do for you.

Contact: Mr. Richard Langton • 714-733-6200 x206 • 714-252-8253 fax • Send Rich a messagewww.bowermaster.com

Products & Services (3): InsuranceOther ServicesRisk Management Services

Please send me information on:




Builders Automation Machinery Co. — 400 sq.ft. — Booth #303

"Builders Automation Machinery" and "MoldStoppers Manufacturing" are proud to introduce the patent pending "REMEDIATOR". The "REMEDIATOR" is an advanced technology solution to mold issues on lumber. This automated piece of equipment will remove mold from lumber at 3000 psi and then washes the lumber in a 20 gallon per minute bath of patented MoldBlock. In fact the "REMEDIATOR" has been exclusively designed to work with this revolutionary mold inhibitor. After the mold is removed the MoldBlock applied lumber is then warranted for an amazing 90 days in full exposure to the elements. This means no more jobsite cleaning of moldy lumber if you use the "REMEDIATOR".

Contact: Mr. Robert Mitvalsky • 727-538-2180 • 727-536-2624 fax • Send Bob a messagewww.buildersautomation.com


Please send me information on:




CADWORK — 100 sq.ft. — Booth #214

CADWORK is a unique 3D package that enables you to produce full documentation of your projects and create data for fully-automated CNC equipments and non-automated manufacturing. Thanks to its flexibility, you can efficiently build wall, floor and roof panels according to your building system and work out a solution for all details. From the Architecture to the last component, CADWORK will help you!!

Contact: Mr. Laurent Decosterd • 514-524-2442 • 514-524-2443 fax • Send Laurent a messagewww.cadwork.com

Products & Services (1): Computer Software

Please send me information on:




Canadian Wood Products Ltd — 100 sq.ft. — Booth #621

CWP focuses its efforts on certain specialty products in order to offer a service of high quality. Our traders are in touch with forest products suppliers around the world. They can help you find what you need. The following products constitute our specialties: Certified Lumber, Commodities, Export, MSR Lumber, Premium Lumber, Tropical Wood and Pallet Components.

Contact: Ms. Anny Dube • 514-871-2120 • 514-871-9316 fax • Send Anny a messagewww.canadianwood.ca

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Clark Industries, Inc. — 400 sq.ft. — Booth #223

SBC Gold Advertiser 

Clark Industries, Inc. is a privately owned & operated company that manufactures production equipment for the building component industry. We take great pride not only in the equipment we manufacture and the service we provide, but also in the relationships that we've built throughout the years. CII manufactures an assortment of roof & floor truss presses, stand-alone & table style jack presses, post & column lamination equipment, conveyors & horizontal truss stackers, etc. We look forward to seeing you at the show to discuss your needs and our new innovations.

Contact: Mr. Jared Schulz • 417-235-7182 • 417-235-8262 fax • Send Jared a messagewww.clark-ind.com


Please send me information on:




Cold-Formed Steel Council (Sharing space with Structural Building Components Association) — Booth #421

SBCA established the Cold-Formed Steel Council (CFSC) to focus on issues that affect manufacturers of steel structural building components. The goal of CFSC is to protect and educate component manufacturers through risk management and training material. Stop by our booth to see all of CFSC's new products and services.

Contact: Ms. Jill Zimmerman • 608-274-4849 • 608-274-3329 fax • Send Jill a messagewww.cfsc.sbcindustry.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

Component Runner, LLC (Sharing space with MiTek) — Booth #709

SBC Gold Advertiser 

Component Runner, LLC is a Structural Building Components design outsourcing firm offered exclusively for MiTek 20/20 customers. Component Runner uses a Design team approach utilizing a combination of USA Project Managers with 15+ years of industry experience coupled with highly trained India based design technicians resulting in high quality at an affordable price. Component Runner services include; complete building modeling using MiTek eFrame Layout, Panel and MiTek TrussFramer software. We offer truss design services using MiTek 20/20 engineering matched with your defaults and preferences. We provide complete wall panel design services and loose framing and whole house material estimating as well. Come visit us inside the MiTek booth.

Contact: Mr. J. Chip Dean • 781-336-8157 • 781-987-8785 fax • Send Chip a messagewww.ComponentRunner.Com


Please send me information on:




Cordstrap USA — 100 sq.ft. — Booth #614

Cordstrap® is the world leading manufacturer of corded polyester strapping and one-way load securing systems. AAR certified Cordstrap® provides customers with a safe and cost-efficient alternative to steel banding and other conventional transport packaging materials. Since 1965, Cordstrap's mission is to solve strapping, transport, load securing complexities for customers worldwide.

Contact: Mr. Darren Ward • 262-898-6670 • 262-898-6677 fax • Send Darren a messagewww.cordstrap.net


Please send me information on:




DANSCO Engineering, LLC — 100 sq.ft. — Booth #205

Dansco can provide your company with seals, sealed repairs and layouts in 26 states currently, including the recently added state of ILLINOIS. Dansco is also a regional leader in several other building industry related fields: Multifamily Building Design and Structural Engineering, Whole House Residential Design and Engineering, Site inspection, Shoring Design and Inspection for Concrete Formwork & Drafting and Design Work. Dansco prides itself in providing faster turnaround times at a lower cost than many of our competitors and to achieving and maintaining 100% customer satisfaction time after time. Let us show you how Dansco can save you time and money and become part of your team.

Contact: Mr. Jeb S. Syler • 804-876-3540 • 813-645-9698 fax • Send Jeb a messagewww.danscoengineering.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Deacom, Inc. — 100 sq.ft. — Booth #115

Deacom, Inc. produces an integrated accounting and Enterprise Resource Planning (ERP) software system for lumber dealers and building component and modular building manufacturers with hard-to-handle requirements. The DEACOM ERP System seamlessly integrates all areas of your business - from sales order entry and inventory control, to production and invoicing - giving you a comprehensive view of your entire operation from one system. Visit the Deacom booth at BCMC for a free demonstration, and learn how DEACOM can maximize your productivity and profitability today.

Contact: Ms. Susan Shaw • 610-971-2278 x15 • 610-971-2279 fax • Send Susan a messagewww.deacom.net

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Dow Building Solutions — 200 sq.ft. — Booth #413

Dow Building Solutions has been leading the way in delivering energy efficient solutions for over 60 years. Dow offers industry leading brands such as STYROFOAM™ brand foam insulation, THERMAX™ insulation, WEATHERMATE™ solutions, GREAT STUFF PRO™ adhesives and sealants and more. Dow recently introduced STYROFOAM SIS™ Brand Structural Insulated Sheathing a first-of-its-kind residential wall system that combines the structural and water-resistive properties of wood sheathing and housewrap, with the added benefit of insulation. This three-in-one solution reduces installation time and labor enabling architects and builders to easily integrate energy-efficient design into usual building practices.

Contact: Ms. Jan McKinnon • 519-339-5028 • 519-339-3417 fax • Send Jan a messagewww.insulateyourhome.com

Products & Services (1): Insulation Manufacturer

Please send me information on:





More info

Eagle Metal Products — 600 sq.ft. — Booth #100

SBC Gold Advertiser 

Serving the building components industry for more than 20 years with connector plates, design software, engineering services and manufacturing equipment, Eagle Metal is committed to providing exceptional products and customer service. We have licensed fabricators across North America manufacturing building components utilizing our TrueBuild® suite of engineering software. Our products can be found in construction projects ranging from residential to multi-family housing developments, commercial projects and large agricultural structures. Visit our booth to learn more about our quality products, view our design software and experience what sets our company apart from the competition. Eagle Metal...Engineered. Tested. True.®

Contact: Mr. Baird Quisenberry • 972-350-9803 • 972-888-9966 fax • Send Baird a messagewww.eaglemetal.com


Please send me information on:





More info

Eide — 600 sq.ft. — Booth #209

SBC Gold Advertiser 

With deep roots in truss equipment and automation, Eide Integrated Systems LLC was formed in '05 to exclusively market the WizardPDS® and to develop press equipment partnerships & integration methods which allow WizardPDS® technology to be installed in virtually any new or existing truss manufacturing system. The WizardPDS® is the world's leading automated truss jig system and the first to virtually eliminate ALL set-up time and manual jigging at the assembly table. The WizardPDS® converts set-up time to build time. Over (75) systems in operation with 100% customer satisfaction. Remember, seeing is believing! Call today to schedule a tour.

Contact: Mr. Thomas P. Hoy • 612-521-9193 x204 • 612-521-9307 fax • Send Tom a messagewww.eideintegratedsystems.com


Please send me information on:




FastenMaster — 100 sq.ft. — Booth #508

Contact: Ms. Tina Del Monte • 800-518-3569 x466 • 413-786-1760 fax • Send Tina a messagewww.fastenmaster.com


Please send me information on:





More info

Hardy Frames (Sharing space with MiTek) — Booth #709

SBC Gold Advertiser 

Hardy Frames, Inc. manufactures and markets the revolutionary Hardy Frame® shear wall system. The Hardy Frame® is a state of the art pre-fabricated shear panel that is specifically tested to resist lateral and uplift forces resulting from high wind and earthquake loads. The Hardy Frame® is typically used in narrow wall areas around windows or garage openings to brace the wall. The Hardy Frame® exceeds the most stringent requirements of the 2006 IBC and IRC building codes. To learn more about how the Hardy Frame® can work for you and your customers please visit us at the MiTek booth.

Contact: Mr. Maged Diab • 805-477-0793 • 805-477-0993 fax • Send Maged a messagewww.hardyframe.com


Please send me information on:




HOLTEC USA Corporation — 200 sq.ft. — Booth #608

HOLTEC-The worldwide leader in package crosscut systems. Our Transcut® II Portable Crosscut Saw is affordably priced at $6900 for cutting whole bunks of lumber of length and our HOLTEC Precision Crosscut Systems are in use by over 7,000 customers worldwide to cut whole packages of lumber to length in less than one minute with a precision of +/- 1mm (.040").

Contact: Ms. Kim O'Brien • 813-754-1665 • 813-752-8042 fax • Send Kim a messagewww.holtecusa.com


Please send me information on:




Hoover Treated Wood Products, Inc. — 100 sq.ft. — Booth #113

New Exhibitor 

Hoover Treated Wood Products, Inc. has provided fire retardant lumber and plywood for interior and exterior applications since 1955. The superior performance of PYRO-GUARD® and Exterior Fire-X® products often allows treated wood to be used instead of more expensive construction materials like concrete and steel. UL® labeling and third party monitoring insure consistent adherence to our Class A flame spread rating. PYRO-GUARD ® and Exterior Fire-X® are available in FSC certified wood, and can be painted or stained like untreated wood. Our nationwide network of stocking distributors insures immediate delivery of our fire retardant lumber and plywood.

Contact: Ms. Kate Perkins • 706-595-9855 x195 • 706-595-6600 fax • Send Kate a messagewww.frtw.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:





More info

hsbCAD - ITW Building Components Group — Booth #120

SBC Gold Advertiser 

Object oriented technology based on AutoCAD and AutoCAD Architecture. From the drawings created in AutoCAD Architecture you are only a mouse click away to create all the fabrication drawings and details required for automated or non-automated manufacturing including bill of materials and much more. The Design tool of Choice for: Prefabricated Home Manufacturing (Timber and Light Gauge Steel), Timber Framers (Post and Beam), Modular Home Design, Residential Designers, Residential Design, Log home Design, SIP Designers, Builders.

Contact: Mr. Danny Hansen • 514-428-1444 x102 • 514-428-1448 fax • Send Danny a messagewww.hsbcad.com

Products & Services (1): Computer Software

Please send me information on:




Hulk Tool Inc. — 100 sq.ft. — Booth #422

New Exhibitor 

Design and manufacture of custom dies from concept of parts to actual production; die set-up, service and maintenance. Specialize in supplying truss manufacturers with high speed dies to produce in-house truss connector plates.

Contact: Mr. Hanna Elfar • 416-741-9023 • 416-741-0498 fax • Send Hanna a message

Products & Services (2): Tool Sales & ServiceTruss Plate Manufacturer

Please send me information on:





More info

Hundegger USA, L.C. — 2,400 sq.ft. — Booth #601

SBC Silver Advertiser 

Hundegger has manufactured the building industry's leading CNC machinery for over 30 years, and is known for quality and versatility. Products include: the #1 selling Joinery saw; Gantry-style SIPS saws; 4- sided Planers; a component, I-Joist, and Timber Framing saw; and a new linear SIP Saw. The New SC3, the next generation Hundegger SC saw, which the Truss and EWP industries have trusted for years: bevels 0-90, cuts components, wall packages, scarf and hip ridge cuts, stair stringers, 4-angled webs, birds mouths, slots, housings, and entry level joinery, with one saw, and no setups. It is the Whole House Saw™.

Contact: Mr. Rudy Banuelos • 435-654-3028 • 435-654-3066 fax • Send Rudy a messagewww.hundeggerusa.com


Please send me information on:




Integrated Stealth Technology — 100 sq.ft. — Booth #111

Commercial Machinery Fabricators, Inc. offers a number of products, at the 2009 BCMC show including, Trackless Gantry with a 24-inch diameter roller with a VF Drive, a 24-inch Roller Press with lengths of 12ft,14ft,16ft, Steel Slotted truss tables that are plank optional, Trackless Floor Truss, Trackless Jack Table, Inside and Outside conveyor systems, stacker systems, infeed conveyors and lumber carts. Also we have rebuilt machine for sale so stop by and let us see what we can do for you.

Contact: Mr. Edward G. Joseph • 517-323-1996 x213 • 517-327-3451 fax • Send Ed a messagewww.integratedstealth.com


Please send me information on:




Keymark Enterprises, LLC — 400 sq.ft. — Booth #503

Whole House Design, Single Building Model Technology, Intelligent Building Design, Building Information Modeling - KeyBuild is the embodiment of these catch phrases. Keymark is your one stop shop for integrated floor, wall & roof design software, along with truss plate supply, engineering services, machinery interfaces, & precut/mark/route expertise. Visit Keymark's booth at this year's BCMC and witness how theory is becoming everyday practice at Keymark!

Contact: Mr. Erik C. Ipson • 720-622-2039 • 303-443-9054 fax • Send Erik a messagewww.keymark.com


Please send me information on:





More info

Lakeside Trailer Mfg., Inc. — 100 sq.ft. — Booth #409

SBC Gold Advertiser 

Stop by the Lakeside Trailer booth to get all the newest & latest improvements in delivery of components. Over 1700 trailers built and on the road everyday.

Contact: Mr. Lee J. Kinsman • 573-736-2966 • 573-736-5515 fax • Send Lee a messagewww.rollerbed.com


Please send me information on:




Lamco Forest Products — 100 sq.ft. — Booth #203

Innovative, leaner and greener, our products allow better design optimization than dimensional lumber, MSR and LVL products, in floor, wall (tall studs), header, truss, perimeter and roof systems. Featuring: Strong Design Values (1.5E, 1.6E, 1.8E and 2.0E); Customization: Exact Widths 2½" to 16", Exact Lengths up to 32', in increments of 1/16". Lamco advantages: 100% useable, wane free edges, low moisture, dimensional stability, less twisting, flexibility in heights restricted projects, less glue, long spans, no special tools needed to drill/nail, reduces waste, good for Fire Rated Assembly & no need to cut big trees anymore!

Contact: Ms. Melanie Cauchon, B. Eng. • 508-776-5378 • 418-679-4242 fax • Send Melanie a messagewww.lamcoengineeredwood.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




LP Building Products — 100 sq.ft. — Booth #309

LP is a premier supplier of commodity and specialty building products serving multifamily and single family, homebuilding, as well as retail, wholesale and industrial markets. At LP, we are committed to our customers. We take pride in delivering on our promise to provide high-quality products, innovative ideas, and superior service. Our customers have come to depend on this commitment. It's what brings new and long-time customers back to LP year after year.

Contact: Ms. Pam Hannon • 615-986-5797 • 866-822-3761 fax • Send Pam a messagewww.lpcorp.com


Please send me information on:




MangoTech USA LLC / Square 1 Design & Manufacture — 100 sq.ft. — Booth #511

MangoTech. A young business providing Fresh Automated Solutions. MangoTech is a company with a focus on providing practical automation solutions for timber industry businesses throughout the world. The company's rapid growth is a result of its ability to be fast, flexible and innovative in answering real needs, enabling businesses to substantially increase their efficiency and profitability. Contact MangoTech on: 1 866 GO MANGO

Contact: Mr. Richard Vaughn • 866-466-2646 x101 • 951-654-3526 fax • Send Richard a messagewww.Mangotech.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Metriguard — 100 sq.ft. — Booth #302

The World's Leading Provider of precision equipment for: Machine Lumber Grading (MSR & MEL), Veneer Testing (LVL), Bending & Tension Testing (Quality Control) and Structural Panels (OSB & Plywood).

Contact: Mr. Todd Kurle • 509-332-7526 • 509-332-0485 fax • Send Todd a messagewww.metriguard.com

Products & Services (1): Equipment Manufacturer (Truss)

Please send me information on:





More info

Metsa Wood USA — 200 sq.ft. — Booth #412

SBC Silver Advertiser 

Finnforest USA, engineered Wood Division is a manufacturer and importer of Master Plank LVL, Master Q-LVL, Finland Birch Plywood, and Thermowood Thermally Treated Lumber for the residential and light commercial building industry, the mobile/modular industry, and the scaffold rental/erection business, along with a variety of industrial applications. Finnforest Master Plank and Master Q-LVL products are used as headers/beams, scaffold plank, architectural millwork applications, stair stringers, columns, rigid frame construction, window & door parts, ridge beams, and industrial framing applications.

Contact: Mr. Robert Loew • 800-622-5850 x102 • 810-824-4901 fax • Send Bob a messagewww.metsagroup.com


Please send me information on:




Metwood / Nuconsteel — 100 sq.ft. — Booth #612

New Exhibitor 

Metwood manufactures Light Gauge Steel Structural Beams for use in Residential and Commercial applications. These beams have incredible strength, capable of spanning greater distances with fewer supports, can be fabricated with camber to offset deflection to increase unsupported length, and they allow the passage of utilities right through the member. The products are extremely adaptable to all types of building systems, and fit right in with wood, log, ICF, SIP, metal, or any other. Metwood has been innovative since day one and our commitment to innovation continues.

Contact: Mr. Shawn Callahan • 540-334-4294 • 540-334-5027 fax • Send Shawn a messagewww.metwood.com


Please send me information on:





More info

MiTek — 5,500 sq.ft. — Booth #709

SBC Gold Advertiser 

At MiTek we continue to invest in your future through software, machinery, technical support and builders' products. The goal? Bottom-line benefits to your business in any market condition. MiTek software offers the best whole-house design capabilities and production management software. Our technical support is the finest in the industry bringing you quick solutions and MiTek's production automation is sensible and fits your business requirements. Our Focus is on your business - performance, improved productivity and greater accuracy when you need it the most. Because now more than ever your success is our success.

Contact: Mr. Michael Klein • 314-851-7445 • 314-434-1394 fax • Send Michael a messagewww.mitek-us.com


Please send me information on:




Monet Desauw Inc. — 500 sq.ft. — Booth #320

Monet DeSauw Inc. is a company where *Engineering *and *Service* collide, bringing you the most sought after cutting and material handling equipment available to the building industry today. We offer a range of products that include: automated, semi- automated and manual component saws; linear saw; floor web saw; lumber decks; carts; bunk strippers and roller conveyors. Our linear saw has proven to be the most cost effective saw available on the market. Priced at $109,000.00, this product is hard to beat. As everyone knows, our FWA500 floor web saw and DeSawyer 2000 fully automated saw are the most reliable.

Contact: Mr. Kevin Troesser • 573-642-4900 • 573-642-3736 fax • Send Kevin a messagewww.desauw.com


Please send me information on:




Nordic Engineered Wood — 100 sq.ft. — Booth #208

Nordic Engineered Wood manufactures building products for home and commercial applications. Nordic's production facility, comprises state-of-the-art equipment designed to optimize fiber yield with strict quality control. Under a meticulous ISO 14001 program, the company manages over 2 million acres of timberlands and maintains capacities of 140 million linear feet of I-joist and 50 million board feet of glulam production. Nordic is also certified by the Forest Stewardship Council. High density black spruce forms the base for Nordic products. Known for its high strength to weight ratio and consistent fiber quality, Nordic's exclusive black spruce is ideal for engineered wood products.

Contact: Ms. Karen Jakubonis • 514-871-8526 x221 • 514-871-9789 fax • Send Karen a messagewww.nordicewp.com


Please send me information on:




PALFINGER — 800 sq.ft. — Booth #609

Palfinger North America is a world class manufacturer of truck mounted knuckle boom cranes and forklifts. Used in many applications, we offer several models, which can be operated with radio remote control for fast and economical operation. Palfinger also offers the ideal solution for various loading and unloading problems encountered by transport operators. Different models of the Crayler truck mounted forklift are available depending on your specific needs. Palfinger and their distributors can help custom-manufacture a material handling system to meet your toughest challenges! For more information on the Palfinger product lines, please contact us at 800-567-1554.

Contact: Ms. Kristi Kraneyk • 905-374-2975 x248 • 905-374-1203 fax • Send Kristi a messagewww.palfinger-northamerica.com


Please send me information on:





More info

Panel Fastening Systems - ITW Building Components Group — Booth #120

SBC Gold Advertiser 

ITW Panel Fastening Systems is a supplier of pneumatic and Cordless nailing, stapling tools and fasteners for the wood panel industry. We offer Paslode, Duo-Fast and ToolMatic brand tools and fasteners. Our tools are compatible with all U.S. and European automated panel equipment and tools are available with high capacity magazines. ITW Panel Fastening Systems offers an extensive service network to maximize production efficiency, as well as Engineering support when necessary.

Contact: Mr. Pat Ryan • 888-726-3577 • 847-634-1006 fax • Send Pat a messagewww.itwpfs.com


Please send me information on:




PANELS PLUS — 200 sq.ft. — Booth #625

Panels Plus has different options for wall panel lines. From the space saving expandable Combo Table line to our Multi Table Lines, we offer a fully customizable package to meet your needs. Panels Plus newest offering is the Tilt Table. This table can be used for blocking and window and door installation and more. We have added options to our CN100 Component Nailer to include a pusher and component stacking options as well. From 1' to 76' walls, Panels Plus offers a safe, robust, easy to operate and maintain line of equipment. See us at the BCMC in Phoenix!

Contact: Mr. Tim Kaasa • 507-377-5341 • 507-369-0524 fax • Send Tim a messagewww.panplus.com


Please send me information on:




Pelican Bay Forest Products — 100 sq.ft. — Booth #311

Pelican Bay Forest Products is a supplier specializing in Truss materials. Our traders are motivated and dedicated to establishing and managing relationships with their customers and suppliers. Our traders help their customers make lumber-buying decisions, analyze market conditions, and make recommendations to solve problems.

Contact: Mr. Ron Hanson • 541-312-9522 • 541-312-9526 fax • Send Ron a messagewww.pelicanbayfp.com

Products & Services (1): Lumber Wholesaler/Broker

Please send me information on:





More info

Pennsylvania & Indiana Lumbermens Mutual Insurance Companies — 100 sq.ft. — Booth #410

SBC Silver Advertiser 

PLM specializes in Property and Casualty insurance for the lumber, woodworking and building material industries. We offer competitive rates, loss control programs and prompt claims response and handling. We are financially strong and carry an A.M. Best rating of A (Excellent). We will work with any licensed agent of your choosing. For more information visit our booth or contact us at 800.752.1895.

Contact: Ms. Charlotte Friend • 267-825-9352 • 267-825-9351 fax • Send Charlotte a messagewww.plmins.com

Products & Services (1): Insurance

Please send me information on:




Prazi USA — 100 sq.ft. — Booth #408

New Exhibitor 

Contact: Mr. Bob Cumings • 508-747-1490 • Send Bob a messagewww.praziusa.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Robbins Lumber Company — 100 sq.ft. — Booth #323

Robbins Lumber offers distribution centers throughout the Midwest specializing in MSR Pine and MSR spruce lumber. We have office locations in Florida, Michigan and Chicago, IL. Stop by our booth and let us show you our commitment to customer satisfaction.

Contact: Mr. Greg Hellman • 813-971-3030 x264 • 813-971-1329 fax • Send Greg a messagewww.robbinslumber.com


Please send me information on:




Senco Brands, Inc. — 100 sq.ft. — Booth #212

For over 55 years Senco has been the worldwide leader in fastening systems, providing a wide range of products to meet the needs of the building industry. With manufacturing in the USA, Latin America, Asia and Europe, Senco continues to be a worldwide leader in pneumatic, battery, gas and electric-operated stapling, nailing, collated fasteners and screw systems.

Contact: Mr. Terry Dullaghan • 800-472-8603 • 513-388-2081 fax • Send Terry a messagewww.senco.com

Products & Services (2): Fastener SupplierTool Sales & Service

Please send me information on:





More info

Simpson Strong-Tie — 200 sq.ft. — Booth #620

SBC Gold Advertiser 

Simpson Strong-Tie Company is the world's largest manufacturer of steel connectors for wood construction. The product line totals nearly 7,000 items, with more than 1,700 different joist hangers alone. Strong-Tie® connectors for solid timber, composite wood products and plated trusses are the most specified of any brand. Simpson Strong-Tie offers its Quik Drive auto-feed screw driving systems. Combining speed of collated fastening with strength and safety of screws, Simpson Strong-Tie's Quik Drive system maximizes production and reduces labor in the truss plant or on the jobsite. www.strongtie.com.

Contact: Ms. Frankie Emerson • 925-560-9081 • 925-833-1496 fax • Send Frankie a messagewww.strongtie.com


Please send me information on:




SL-Laser Systems — 100 sq.ft. — Booth #221

Founded in 1988, SL Laser has been a pioneering force in the development of precision single and multiple head laser projection systems for truss, floor deck and wall panel systems. Our patented hardware and state-of-the-art software feature many user-friendly features designed to enhance functionality, while prompting the easy-to-use fundamentals that make our systems the industry benchmark. Seamless integration between TrussPilot™ software and hardware results in reduction of production costs and an increase in accuracy and profitability. Our Laser Systems can be found projecting increased productivity in some of the finest building components manufacturing companies in the world.

Contact: Mr. Jason Galek • 704-561-9990 x103 • 704-561-9994 fax • Send Jason a messagewww.sl-laser.com

Products & Services (1): Laser Equipment

Please send me information on:




Smart-Evolution Corp — 100 sq.ft. — Booth #523

New Exhibitor 

Smart-Evolution Corp. is a company that specializes in custom automation and software design for the engineered wood industry. We pride ourselves in bringing to the industry leading edge technology, unparallel service and technical support to satisfy our customer needs.

Contact: Mr. Walter Girotto • 450-347-1121 • 450-347-1121 fax • Send Walter a messagewww.smart-evolution.com


Please send me information on:




Spotnails — 100 sq.ft. — Booth #313

Spotnails has been one of the leading manufacturers of pneumatically driven fasteners for nearly 70 years. The Company manufactures a wide range of industrial fastening products including nails, staples, pins, brads and tools for use in packaging, furniture/woodworking, construction, factory-built housing and many other industries. With manufacturing facilities in the United States, Mexico and Korea, Spotnails is keeping pace with the demand for quality tools and fasteners.

Contact: Ms. Candace Mortensen • 847-259-1620 • 847-259-9236 fax • Send Candi a messagewww.spotnails.com

Products & Services (2): Fastener SupplierTool Sales & Service

Please send me information on:




Stanley-Bostitch — 100 sq.ft. — Booth #623

Stanley-Bostitch is a global manufacturer of fastening solutions for the factory built housing and component industry, on-site construction, and DIY markets. Our full program includes custom fastening for automated production, complete service, and on-site support to insure a lean and productive environment.

Contact: Ms. Wendy Johnson • 401-471-4401 • 401-884-5057 fax • Send Wendy a messagewww.bostitch.com


Please send me information on:




Todd Drummond Consulting, LLC. — 100 sq.ft. — Booth #726

Lean manufacturing consulting services - 40+ consultations demonstrate that companies can improve their bottom line through lean and TOC principles. Time standards (R.E., S.U. Man-Minutes) provided. Practical advice you can use to implement positive changes. See what past clients are saying on web site.
Got QuickBooks? Truss Shop Labor Tracking software to quote, schedule, and track actual shop labor and apply COGS to QuickBooks. Import truss information to process your order from quoting, production, then through the accounting process. (Release Date: Oct 09) Free 3 month, no obligation trial period!

Contact: Mr. Todd Drummond • 603-763-8857 • none fax • Send Todd a messagewww.todd-drummond.com


Please send me information on:




Truss Plate Institute — 100 sq.ft. — Booth #521

The Truss Plate Institute (TPI) and its members are connecting the truss industry. Come visit the TPI booth to see how and to learn more about the products and services provided by TPI. Speak to our professional staff about our nationally recognized 3rd Party Quality Assurance Inspection Program. Learn about the ANSI/TPI 1-2007 standard. Review and ask questions about other guidelines and technical publications such as BCSI. See you at the show!

Contact: Mr. Michael A. Cassidy, R.A. • 703-683-1010 • 866-501-4012 fax • Send Mike a messagewww.tpinst.org

Products & Services (2): AssociationThird Party Inspection Agency

Please send me information on:




Trussoft, LLC — 100 sq.ft. — Booth #426

New Exhibitor 

TrimJoist Corporation has the solution for your low productivity floor truss projects. Let us help you get your customer's project moving while you concentrate on getting the roof system he needs.

Contact: Mr. Barry Sanford • 662-327-7950 x123 • 662-245-0040 fax • Send Barry a messagewww.trimjoist.com

Products & Services (1): Wood Floor Truss Manufacturer

Please send me information on:




Wall Panel Council (Sharing space with Structural Building Components Association) — Booth #421

SBCA's Wall Panel Council provides information and resources for the manufacturers of wood wall panels and their suppliers, and it will assist them as they act to expand the market for their products.

Contact: Ms. Trish Kutz • 608-274-4849 • 608-274-3329 fax • Send Trish a message

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Wasserman & Associates, Inc. — 300 sq.ft. — Booth #510

Wasserman & Associates is a representative for new truss, wall panel, stair, door, fingerjointing and material handling equipment. We also offer the option of used or reconditioned equipment. As a partner in your equipment selection process, we promote the equipment that best suits your individual requirements, not the equipment that optimizes our commission. Equipment Financing, Removal, Shipping, Installation and Training is available. Buying or selling, large or small budget, please contact us.

Contact: Mr. Rod Wasserman • 402-761-2421 • 402-761-2422 fax • Send Rod a messagewww.wasserman-associates.com


Please send me information on:




West Fraser — 100 sq.ft. — Booth #109

West Fraser's vision is to be the leading forest products company in the U.S. and Canada. Our goals are simple - leadership in profits, responsibility in communities, commitment to the environment, excellence in people, strength in products. From homes to picket fences, wood has built the North American Dream and West Fraser takes great pride in supplying wood products to the world. With 15 mills in Canada and 15 mills in the Southern United States, we can produce 2.6 billion board feet annually with a variety of softwood lumber products. Please come by and visit us today.

Contact: Mr. Barry Bauman • 800-841-2507 • 901-620-4204 fax • Send Barry a messagewww.westfraser.com

Products & Services (0): (none defined for this exhibitor)

Please send me information on:




Wood Truss Council (Sharing space with Structural Building Components Association) — Booth #421

The Wood Truss Council (WTCA) is SBCA's largest council. Representing the wood structural building components industry in the US, Canada and internationally, WTCA provides a comprehensive supply of tools and resources for wood truss manufacturers.

Contact: Ms. Trish Kutz • 608-274-4849 • 608-274-3329 fax • Send Trish a message

Products & Services (1): Association

Please send me information on:





More info

Wood Truss Systems, Inc. — 200 sq.ft. — Booth #720

SBC Silver Advertiser 

USED AND NEW EQUIPMENT - Fully independent, we search from top suppliers and our large listing of used equipment to develop the right solution for you. WTS is known for delivery of innovative and objective solutions plus service that consistently places us among the top sales representatives in North America. You can count on effective and economical solutions featuring: Truss and Wall Panel Equipment, Automated Component Saws, Radial Arm Saws, Material Handling Systems, Automated Jigging Systems, and the ability to custom design your own used systems.

Contact: Mr. Jay R. Halteman • 765-751-9990 • 888-751-9914 fax • Send Jay a messagewww.woodtrusssystems.com


Please send me information on:




ENTER YOUR CONTACT INFORMATION

Please enter information so that exhibitors can get back to you.

Please before using this form to submit requests for information. By doing so you will avoid the need to enter your contact information below.

Your name:*
Company name:
Phone:*
Your email address:*
Verify your email address:*

*Required

 
© 2014 Building Component Manufacturers Conference   © Menu